Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: mysticeyes on July 04, 2012, 12:34:00 PM

Title: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
Post by: mysticeyes on July 04, 2012, 12:34:00 PM

I've got a Manfrotto extension rod (099B) and a three-piece articulating arm (196). It looks like the 196 comes with two built-in spigots that slide into the slot in the Superclamp and can be held in place with the set screw, but that's probably not the approved way to do it  :).

So, what parts do I need to attach these to the Superclamp? Any help appreciated, thank you.

Title: Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
Post by: vanark on July 04, 2012, 12:45:27 PM

Quote from: mysticeyes on July 04, 2012, 12:34:00 PM

I've got a Manfrotto extension rod (099B) and a three-piece articulating arm (196). It looks like the 196 comes with two built-in spigots that slide into the slot in the Superclamp and can be held in place with the set screw, but that's probably not the approved way to do it  :).

Why wouldn't that work for the articulating arm?  I've always done it this way.

for the 099B, I secure it to the superclamp stud - works like a charm.  Do you have the stud?

(http://www.bhphotovideo.com/images/images150x150/546377.jpg)

Title: Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
Post by: mysticeyes on July 04, 2012, 12:55:42 PM

Thanks, vanark. I believe I see it now.
The articulating arm attaches by one of its spigots, just like I've tried it.
And I've got the stud, the hexagonal piece with a 1/4" screw at the end. I just tried securing the stud to the bottom of the 099B, tightening it with the set screw, and then the stud slides into the clamp. Great!
Thanks again.

Title: Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
Post by: page on July 04, 2012, 01:37:24 PM

Quote from: vanark on July 04, 2012, 12:45:27 PM

Why wouldn't that work for the articulating arm?  I've always done it this way.

+1

I've got the bigger 396 and thats what I do. Thats not the only way to run it, but it's the safest way.

Title: Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
Post by: spyder9 on July 06, 2012, 07:21:26 PM

I used the 196 + superclamp at Alpine Valley last weekend.  Clamped to the SBD doohick.  Perfect match. 

Title: Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
Post by: jbell on July 07, 2012, 05:51:44 PM

My superclamp has a stud with threads on each side and doesn't fit my Manfrotto 099B.  Can some one link a stud that works with the Manfrotto extension pole??  TIA

Edit:  I modified my stud by taking off the 1/4 thread and it fits like a glove now!! 

Title: Re: Attaching Manfrotto 099B and 196 extensions to a Superclamp?
Post by: mysticeyes on July 07, 2012, 07:20:15 PM

I ordered my Superclamp with a stud with a single 1/4" screw thread at the end that fits into the 099B, as advised above. It's a Manfrotto part that you can get from B&H, etc.