Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: weroflu on August 22, 2012, 05:20:30 PM

Title: spaced a/b to mono and jecklin questions
Post by: weroflu on August 22, 2012, 05:20:30 PM
what are the issues in collapsing spaced a/b omni to mono?

are there any negatives to using a jecklin disc for  close instrument micing?

what are the negatives in using smaller discs than what is recommended?

Title: Re: spaced a/b to mono and jecklin questions
Post by: Gutbucket on August 22, 2012, 10:00:12 PM
what are the issues in collapsing spaced a/b omni to mono?

None if you use just one of the channels and toss the other.  Possible mono compatibility if mixing them together, but why do that when you already have two mono recorings both of which are non-directional on their own?   Mono playback might sound more distant than stereo, so if you know you will be doing this maybe put the mic(s) closer than you would have for a stereo spaced omni recording.

Quote
are there any negatives to using a jecklin disc for  close instrument micing?

Limited isolation if that is important, may be visually imposing. Potential to sound good otherwise.

Quote
what are the negatives in using smaller discs than what is recommended?

Baffling not effective to as low a frequency as that achieved by a larger baffle, less spacing is possible between mics while retaining the effectiveness of the smaller baffle.  Many here have made smaller baffles and mount the mics closer together / closer to the surface.