Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: magmazing on October 20, 2012, 09:50:16 PM

Title: Loose Battery Box Connection
Post by: magmazing on October 20, 2012, 09:50:16 PM

Last night I recorded a show and came home with glitchy audio. Then I noticed the connector on the battery box (hexagon shaped connector) that connects to the positive side of the 9volt doesn't hold a tight connection anymore.

Is there a way to fix this? Do I just take some pliers and squeeze a little? Or am I going to just have to wrap tape around the battery before a show to hold it in place now?

Title: Re: Loose Battery Box Connection
Post by: Church-Audio on October 20, 2012, 11:27:28 PM

Yes always make sure they are tight. Pliers are fine just dont go crazy. You dont want to break that connector off. Also check the 9v battery and make sure its crimp connection is also good.