Taperssection.com

Gear / Technical Help => Post-Processing, Computer / Streaming / Internet Devices & Related Activity => Topic started by: Popmarter on November 03, 2012, 10:18:41 AM

Title: Wavelab 6: How to select more channels at once? (noob)
Post by: Popmarter on November 03, 2012, 10:18:41 AM

Hi, I made a multichannelrecording and now I have loaded all 3 channels into Wavelab (all 3 mono). I want to select (and delete), let's say, the first 10 minutes, but I do not know how to do that.... (it must be simple..).
I can only select one part a once.

Any clue?

thanks
Popmarter

Title: Re: Wavelab 6: How to select more channels at once? (noob)
Post by: jibooer on November 03, 2012, 06:19:40 PM

Forgive me, my memory is fuzzy, but IIRC, in new Audio Montage the cursor can be placed at any place within the window so that the cursor line extends through all the tracks.
Check out the pics in this thread:
http://taperssection.com/index.php?topic=146952.msg1887339#msg1887339

You can also edit the 32-bit float file that is created after you mix it down as well...

Hope this helps.

Title: Re: Wavelab 6: How to select more channels at once? (noob)
Post by: MULETAPER on November 04, 2012, 09:32:52 AM

in montage you should be able to slide the part over you dont need

Title: Re: Wavelab 6: How to select more channels at once? (noob)
Post by: Popmarter on November 05, 2012, 08:13:55 AM

thanks for the comments sofar, but  i was hoping to slide over the 3 channels at once, so i delete the same part in al channels.

Title: Re: Wavelab 6: How to select more channels at once? (noob)
Post by: jibooer on November 05, 2012, 12:42:28 PM

only way to do the three tracks at once is in the montage window part of wavelab.

Title: Re: Wavelab 6: How to select more channels at once? (noob)
Post by: Popmarter on November 05, 2012, 02:28:09 PM

I was working in montage, that is where i added channel 2 and 3. They are all nice above eachother, but i can only slide one at a time... so strange