Taperssection.com
Gear / Technical Help => Recording Gear => Topic started by: augwest71 on December 16, 2012, 10:41:28 PM
-
not sure if this is the right spot, but i need to know if the 722 can hold a 500 gig hard drive or if i need to find a smaller one.. and could someone repost where the instructions are on how to change out the hard drive? :)
thanks for any help
augwest71
-
Here's the instructions: http://www.sounddevices.com/notes/recorders/drive-replacement/
The 7-series can address up to 2TB per: http://www.sounddevices.com/download/guides/xlsata_en.pdf
I pulled the drive from my 744T when it failed, and haven't picked up a replacement yet. It works fine as a 704T (ie: CF only) for now. The only advice I have is this -- do not pick up the unit itself while the top lid is removed. Aligning just the top is easy. Trying to align more pieces of this puzzle is a lot harder and may result in excessive swearing.
-
Be sure you order a 2.5" PATA drive unless you plan to also upgrade to a 2.5" SATA drive and then you will also need the XL-SATA adapter from SD.
-
thank you for the info