Text only | Text with Images

Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: rigpimp on April 06, 2013, 07:05:10 PM

Title: V3 question
Post by: rigpimp on April 06, 2013, 07:05:10 PM
I have a consumer DAT deck with an optical out.  I have a V3 with an optical in.  Is there a way that I can pass the digital signal from my DAT through the AES out on my V3?  I already have an AES>RCA cable to go into my R-44.

DAT (optical out) > V3 (optical in) / V3 (AES to digital RCA out) > R-44 (digital RCA in)
Title: Re: V3 question
Post by: picklemic on April 06, 2013, 08:09:36 PM
You have an optical output / not input on the V3. So I don't think that will work.
Title: Re: V3 question
Post by: tgakidis on April 06, 2013, 09:30:16 PM
Plug it up and give it a try!
Title: Re: V3 question
Post by: rigpimp on April 06, 2013, 10:18:24 PM
picklemic is right.  It is an output.  duh.
Title: Re: V3 question
Post by: Todd R on April 07, 2013, 01:36:02 AM
http://taperssection.com/index.php?topic=161473.0
Text only | Text with Images