Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: Colin Liston on May 01, 2013, 09:51:01 AM

Title: stand adapter?
Post by: Colin Liston on May 01, 2013, 09:51:01 AM

I need a stand adapter like the one shown, but I need it to be 1.5" - 2" long.  Any ideas?  I need to be able to use this for 2 t-bars, one on top of the other. 

(http://ep.yimg.com/ca/I/cinemasupplies_2258_537865202)

Title: Re: stand adapter?
Post by: it-goes-to-eleven on May 01, 2013, 10:02:00 AM

Use a piece of 3/8" threaded rod between two adapters.  Optionally cover the rod with shrink wrap, at least for longer lengths.  Use a wing nut at each end to lock it down and provide rotational alignment.

Title: Re: stand adapter?
Post by: ScoobieKW on May 01, 2013, 10:02:26 AM

http://onstagestands.com/products/view/117219

or

http://onstagestands.com/products/view/117524

screwed onto the 5/8 adapter.

http://onstagestands.com/products/view/117217

Title: Re: stand adapter?
Post by: flipp on May 01, 2013, 11:17:48 AM

http://onstagestands.com/products/view/117259

a second T-bar with a removable riser but the female is 5/8 so if you are mounting it to a 3/8 male it won't work without the adapter in your original post