Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: phishn on March 29, 2004, 09:05:27 AM
-
Hi,
I recieved a Shure A27M vert bar and am wondering what the thead diameter is inside the bottom of the bar. Is the bottom 3/4 or 5/8 inch? Does the bar normally come with an adapter? I believe my mic stand has a 3/8 inch thread and am trying to figure out where I can get the right adapter.
-
+T..thanks!
-
normally the bar does not come with the adapter
-
ok..i have a manfrotto stand so i think the thread is 1/4 inch so I'm guessing i need to go from 5/8 to 1/4
-
call up daleproaudio at 888-462-7828, tell em what you have and they know exactly what to get you :-) good guys too.
-
I may do that. That's where I got the vert bar from initially. Just wish I knew there was extra stuff I needed to order.
-
This is the adapter I believe I need...assuming the vert bar is 5/8 inch.
-
yep, 5/8" on the shure vert bar
-
I currently have an AKG bar with an adapter that connects to the mic stand. This connector I assume is not 5/8 since it looks too small for the vert bar.
-
FYI, the adapter pictured won't help you get from your 3/8" thread to 5/8". That particular set of adapters is to take you from a 5/8" stud to a 5/8" thread (and also supports 3/8" thread as well, I think).
We know your Shure bar is threaded 5/8"-27. You need to find out exactly which thread/stud size your stand/clamp is to ensure you get the proper adapter.
-
Take the adapter off the AKG bar. it's 5/8 as well.
EDIT* Make sure the adapter is not 2 pieces on the AKG bar & your leaving one of them on the bar.
-
Most any music store that sells mics will have 3/8" to 5/8" adapters.....actually they will give them away as they still come w/ many mics yet are rarely needed. A decent camera store will sell a 1/4" to 3/8" sleeve for $1 or so!
-
I've been looking for these adapters and they are not stocked by most camera or hardware stores, nor do they cost $1. The 3/8" to 5/8" is common. However, the 1/4" to 5/8" is not. I checked with a bunch of camera stores in Atlanta and non had one, or even knew what I was talking about. B&H Photo, which stocks all kinds of pro photo and audio gear, has a 3/8" to 5/8" adapter for around $4. Dale Pro Audio has the 1/4" to 5/8" for $15.
http://www.daleproaudio.com/product.asp?r=%2D1&SKU=AEA%2A%2DTA1&web%5Fname=&price%5Fhide=0&subcat1=&subcat2=&subcat3=&subcat4=&subcat=&subcat5=&subcat6=&subcat7=&subcat8=&Subsite%5FName=&mscsid=408J4T9KP5GH8JGB2XJJX49UCGH32B95
-
You put the two pieces together
1/4" to 3/8" - Sold at Camera stores for $1.00
3/8" to 5/8" - Mic salesman have these to give away
I know I'm glad I spent a $1.00 on the junk instead of $15.00 plus shipping......
-
Thanks all for the help. There was an adapter that was practically welded to the akg bar..i removed it with about an hour of struggling and it is 5/8 and fits the vert bar fine.