Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: Chimney Top on June 13, 2013, 05:27:36 PM

Title: Building a Suction Cup Stand (Thread Adapters?)
Post by: Chimney Top on June 13, 2013, 05:27:36 PM

I want to build a suction cup mic stand, however most sold have a 1/4" thread for camcorders.  Is there an adapter, converter, etc that I can attach a stereo bar to the suction cup stand?

Thanks!


http://www.ebay.com/itm/New-Pump-Window-Vacuum-Suction-CUP-Mount-Tripod-Stand-for-Camera-DV-GPS-Black-/230980244291?pt=LH_DefaultDomain_0&hash=item35c77ed343


or something like this:

http://vimeo.com/33421306

Title: Re: Building a Suction Cup Stand (Thread Adapters?)
Post by: vanark on June 14, 2013, 08:51:54 AM

All sorts of 1/4" to 3/8" adapters and then a 3/8" to 5/8" on that.  I have a few in my bag.  If you browse around B&H's web site, you'll find what you need.

Title: Re: Building a Suction Cup Stand (Thread Adapters?)
Post by: Chimney Top on June 19, 2013, 01:48:55 PM

Quote from: vanark on June 14, 2013, 08:51:54 AM

All sorts of 1/4" to 3/8" adapters and then a 3/8" to 5/8" on that.  I have a few in my bag.  If you browse around B&H's web site, you'll find what you need.

cool, thank you.