Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: larrysellers on June 17, 2013, 07:21:34 PM

Title: Shure A26M...would it make a suitable M/S mount?
Post by: larrysellers on June 17, 2013, 07:21:34 PM

Take a look at the pic and let me know what you think.

(https://www.scmsinc.com/uploads/ecomm/a26ma.jpg)

Title: Re: Shure A26M...would it make a suitable M/S mount?
Post by: F.O.Bean on June 17, 2013, 07:41:45 PM

Seems fine to me. What size mm are the mount holes?

Title: Re: Shure A26M...would it make a suitable M/S mount?
Post by: John Willett on June 18, 2013, 06:08:37 AM

Quote from: larrysellers on June 17, 2013, 07:21:34 PM

Take a look at the pic and let me know what you think.

(https://www.scmsinc.com/uploads/ecomm/a26ma.jpg)

It depends.....

It could work very well, but it will depend on the diameter of the microphones and the size of the microphone heads.

It could hold them too far apart, or too close.

My preferred method is to use a Rycote INV-7 or INV-7HG with a pair of the Rycote back-2-back clips.  This works perfectly.

Title: Re: Shure A26M...would it make a suitable M/S mount?
Post by: larrysellers on June 18, 2013, 08:55:42 AM

You're right John...the Rycote looks perfect. Thanks.