Text only | Text with Images

Taperssection.com

Gear / Technical Help => Recording Gear => Topic started by: jerryfreak on September 26, 2013, 05:55:20 PM

Title: comp: pcm-m10 vs r09-hr mic in and line in
Post by: jerryfreak on September 26, 2013, 05:55:20 PM
http://www.sendspace.com/file/ca1qeg
http://www.sendspace.com/file/0y47bf
http://www.sendspace.com/file/xdzn8o
http://www.sendspace.com/file/q7yyd4

source: GD mastered sbd>benchmark dac1 hdr>analog out>mic/line in of recorder.

levels were about 5 on the m10, and matched as close as i could get them on the r09. had to normalize one of the sources 1db in each case but they are within about 0.1%
Title: Re: comp: pcm-m10 vs r09-hr mic in and line in
Post by: page on September 26, 2013, 09:45:23 PM
Did they have the same RMS values (or within 0.1db) or just peak values?
Title: Re: comp: pcm-m10 vs r09-hr mic in and line in
Post by: jerryfreak on September 27, 2013, 12:13:14 AM
RMS
Title: Re: comp: pcm-m10 vs r09-hr mic in and line in
Post by: page on September 27, 2013, 09:58:28 AM
 :clapping:
Title: Re: comp: pcm-m10 vs r09-hr mic in and line in
Post by: spyder9 on September 27, 2013, 10:12:20 AM
Nice.  I'll grab this tonight and let you know.  Thanks.
Text only | Text with Images