Print Page - Sonasax SX-M2 Low Cut?

Title: Sonasax SX-M2 Low Cut?
Post by: Jhurlbs81 on December 23, 2013, 09:53:55 AM

Hey All-

Does anyone have any information on the details of the Sonasax SX-M2's low cut setting? Curious where the rolloff begins and how step it is, the manual was less than helpful. ::)

11. LOW CUT FILTER
The "LF CUT" filter allows cutting of very low frequencies. To turn on this filter,
move the "LF CUT" switch downward.
Use this filter only if necessary!

Title: Re: Sonasax SX-M2 Low Cut?
Post by: JD on December 23, 2013, 10:09:06 AM

18dB/oct, -3dB at 70Hz

http://www.sonosax.ch/discontinued/sxm2m1/sxm2m1_index.html (http://www.sonosax.ch/discontinued/sxm2m1/sxm2m1_index.html)

Title: Re: Sonasax SX-M2 Low Cut?
Post by: Jhurlbs81 on December 23, 2013, 10:12:51 AM

:banging head:

http://www.youtube.com/watch?v=qpMeOivb1Vs

Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: Jhurlbs81 on December 23, 2013, 09:53:55 AM