Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: speedo on July 27, 2014, 11:07:39 AM

Title: Protecting blimp M/S rig without blimp
Post by: speedo on July 27, 2014, 11:07:39 AM

I am trying to make a portable field recording setup that is ready to go at moments notice. I have schoeps 6 mk 4 and 8 mounted in a rycote m/s pistol suspension and the rycote ae blimp.

The problem is getting it all to fit in a single backpack. The SD702 and rig fit fine without the blimp. So I want to protect the rig while it's not in the blimp, and carry the blimp in a seperate bag then be able to whip it out and blimp it up. My main question is, Does anyone have any ideas for protection while the m/s suspension is not in the blimp? I picture a hard plastic case that surrounds the mics but has a hole for the pistol grip.

Title: Re: Protecting blimp M/S rig without blimp
Post by: groovon on July 27, 2014, 02:03:15 PM

'Ready to go at a moment's notice'... In that case I'd keep my mics in the blimp, fold the handle, and carry the whole thing in a soft case. Saves a ton of space, offers perfect protection (shockproof!) and is way more 'ready to go' than any scenario requiring reassembly. (If you need even more protection for the mics, stuff some bubble wrap around them inside the blimp.)

Dave

Title: Re: Protecting blimp M/S rig without blimp
Post by: John Willett on July 29, 2014, 07:35:00 AM

I would keep the mics in the rig - HOWEVER - to stop them bouncing around in transit, I would go to a local case company and get some custom foams from them.

IE: slide open the windshueld and place the custom-cut foams each side of the mics and then slide them into the windshield again.

This will protect them safely in transit inside the windshield.