Taperssection.com
Gear / Technical Help => Recording Gear => Topic started by: yltfan on November 10, 2014, 03:06:20 PM
-
Here in Portland, we keep running into soundboards with digital-only outputs for multitrack recording (mostly firewire, I believe). Anyone have a good suggestion for an entry-level rig for this? Ideally, it would be able to handle the traditional 1/4" direct outs as well, but I know next to nothing about the options out there, so if having both options means twice as much gear/$, I would probably just go with the firewire setup. I do have a decent Windows 8 laptop if that helps. In addition to recording all channels off the board, I would want to add 1 or 2 sets of mics, so phantom power would be nice, but not necessary.
Apologies for the noobness on this, of if I'm posting in the wrong forum.
Edit: Should I be posting in Ask a taper? Team Multitrack?
-
Here in Portland, we keep running into soundboards with digital-only outputs for multitrack recording (mostly firewire, I believe). Anyone have a good suggestion for an entry-level rig for this? Ideally, it would be able to handle the traditional 1/4" direct outs as well, but I know next to nothing about the options out there, so if having both options means twice as much gear/$, I would probably just go with the firewire setup. I do have a decent Windows 8 laptop if that helps. In addition to recording all channels off the board, I would want to add 1 or 2 sets of mics, so phantom power would be nice, but not necessary.
Apologies for the noobness on this, of if I'm posting in the wrong forum.
Edit: Should I be posting in Ask a taper? Team Multitrack?
laptop?
-
The simple answer is a laptop with Reaper installed - and a USB/Firewire cable.
Find out what consoles you are working with and install the proper USB/Firewire drivers. (this is problematic as some want you to be connected to the mixer to install)
If you want to add a set of room mics - you'll have to have 2 extra channels available on the board (that aren't sent to the house mix)
Helps if you have own preamp for the room mics so you can control the levels a bit without having to be at the board.
Multitracking is not an ideal situation for "walk up" tapers...you really have to hope your soundperson has things configured a certain way.
So - some relationship building helps here too. Being in house for soundcheck is almost a must.
Since you mentioned Phantom power - it sounds like you are envisioning a stand-alone recorder or USB interface.
Stand-alone recorders are 8 channels max - (and chances are you need more channels than that.)
Then you'd be looking at at multichannel USB/FireWire interface and a laptop...and a lot of cables!