Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: OhioHead on May 08, 2015, 07:29:25 PM
-
The Avlex NM-30 shock mount was highly recommended for Brian's (it goes to eleven) CA-14 bar......spoken w/ my local Avlex reseller today, the Avlex is back ordered a minimum of 5 weeks b/c of the west longshoreman strike.......pretty confident Brian's bar is 20mm thick, need a well made & quick to procure shock mount. I know so folks make mounts onTS, please recommend......
This will be double posted under the mic section.
-
You want this ---> http://www.bhphotovideo.com/c/product/68622-REG/Shure_A53M_A53M_Isolation_and_Swivel.html .
-
Thank you, this could work (can't tell what holds the bar in place?)!
-
Brian provided me with a foam piece that held the bar inside of a 20mm shockmount. The bar itself is very slim, the foam gets everything seated nicely.
Im using an HM-30 mount, which you can purchase here: http://www.superlux.us/smalldiaphragm.html
-
Awesome info below!
Ordered 2 of the Shure mount from a local shop on Monday (1 mount for each bar), I will use foam if the bar is loose.
Brian provided me with a foam piece that held the bar inside of a 20mm shockmount. The bar itself is very slim, the foam gets everything seated nicely.
Im using an HM-30 mount, which you can purchase here: http://www.superlux.us/smalldiaphragm.html