Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: voltronic on September 07, 2015, 04:42:43 PM
-
Studer58 shared some interesting reading here:
https://www.gearslutz.com/board/remote-possibilities-acoustic-music-location-recording/1029514-anyone-interested-schoeps-manufacturing-processes.html (https://www.gearslutz.com/board/remote-possibilities-acoustic-music-location-recording/1029514-anyone-interested-schoeps-manufacturing-processes.html)
-
Great read- THANKS! 8)
I dig this quote ( and photo):
. There are no photos allowed in the capsule manufacturing area where the
parts come together and are tweaked but we have included one example of a box of the
46 ‘pieces’ that go into an MK 4 capsule.
-
Great read- THANKS! 8)
I dig this quote ( and photo):
. There are no photos allowed in the capsule manufacturing area where the
parts come together and are tweaked but we have included one example of a box of the
46 ‘pieces’ that go into an MK 4 capsule.
If you ever have the chance to visit Jerry Bruck at the Posthorn "office" in NYC, ask to see his mechanically deconstructed MK5. It's a piece of glass with every MK5 component separated, allowing you to see al the little screws and pieces within a single capsule. Gives an excellent perspective for how complicated each capsule is.