Print Page - Edirol AC adapter wiring

Title: Edirol AC adapter wiring
Post by: BMXREPLAY on November 04, 2015, 04:11:36 PM

I'm in the process of converting my Edirol UA-5 to battery power, however I have a slight problem. I have a Japanese adapter Model ACI-100C and it has wiring of a type I have never seen. Its a Yellow wire with a bare copper wire wrapped around it, any ideas as to what this is?

Title: Re: Edirol AC adapter wiring
Post by: cybergaloot on November 05, 2015, 10:41:05 AM

Can't comment on the wiring but remember that the center post is negative and outer ring is positive on the UA-5. Opposite of what most AC adapters do.

Title: Re: Edirol AC adapter wiring
Post by: BMXREPLAY on November 05, 2015, 02:10:37 PM

Thanks your right, just found the diagram.

Title: Re: Edirol AC adapter wiring
Post by: BMXREPLAY on November 15, 2015, 05:55:33 PM

I've messed up on upgrading the capacitors, I ordered silmic II 25v instead of 6.3v. Will this be a problem? its where bypass capacitors are fitted.

(- replace two 22uF aluminum caps near ADC with higher quality electrolytic bypassed with 0.1uF poly or film cap)

http://taperssection.com/index.php?topic=62680.0

Taperssection.com

Gear / Technical Help => Cables => Topic started by: BMXREPLAY on November 04, 2015, 04:11:36 PM