http://www.samsclub.com/eclub/main_shopping.jsp?coe=0&oidPath=0%3a-23542%3a-32122%3a-32126%3a-32134%3a768340&mt=a&n=0&BV_SessionID=_SC_1027818065.1082948377_CS_&BV_EngineID=cccgadclemfgdhdcfkfcfkjdgoodfkf.0
will this charge SLA Battery's safely?
Nick
can't get to that link, but this is what i have:
http://www.xenotronix.com/products/leadacid/hpx-10.htm
and if you wanna pay me 10 bucks plus shipping ive got one here with no end on it. its a 12v powersonic 800aH charger. it just needs whatever 4 pin you want soldered to the cable.
if the powersonic switches automatically from charge to float when the battery is almost done, I Want it.
i believe it does, but id ask someone who might know better- this is, im pretty sure, the exact charger that ecocharge uses.
it should have a charge led that goes off when in float mode.
i dont know because i dont have an end on it to test :-)
If it's the Powersonic PSC-12800A (800 mA fast-charge rate), then yes, it switches to float (I have the same charger).
thats the charger. if you want it pm me and we will work out the details
Yea Brian is right on w/ the part number. If that is what you got i need that charger.
fozzy, drop me a pm. we will work it out.
another q on 12v
will any old "float" charger work on an ecocharge 12v???
just wondering if theres some kind of weird thing where theyre not compatible w/ other brands
ive only ever used my eco 6v's and eco chargers, so i am just making sure
thanks
bean
http://www.vdcelectronics.com/batteryminder.htm
1A and 4A versions, multi-stage charger with builtin pulse desulphator.
Awesome chargers! I have a few +t!
what kind of ends do they have??? a 4-pin end would be perfect
Quote from: scott brown on April 26, 2004, 11:00:18 AM
can't get to that link, but this is what i have:
http://www.xenotronix.com/products/leadacid/hpx-10.htm
which one would i need for a GP-90???
biggity bump, i gotta let the seller know whats up w/ this gp-90, can it be used w/ any old 12v "flooat" charger???
thats all i really need to know;-)
thanks,
bean
Quote from: bean on May 06, 2004, 10:42:12 AM
biggity bump, i gotta let the seller know whats up w/ this gp-90, can it be used w/ any old 12v "flooat" charger???
thats all i really need to know;-)
thanks,
bean
come on pholks, nobody knows if a GP-90 will work w/ any 'float' charger ???
Not a good idea. (if you are talking about a car battery charger) The float voltage on a flooded cell charger is higher than SLA's and will cook the battery.
Quote from: mikesus on May 08, 2004, 08:20:12 AM
Not a good idea. (if you are talking about a car battery charger) The float voltage on a flooded cell charger is higher than SLA's and will cook the battery.
nah, the GP-90 is an older 12v ecocharge, i would be using a powersonic or xenotronix charger, but i know nothing about 12v really, i just wanna know if the 12v ecocharge battery(the GP-90) will be charged alright by either of the 2 battery chargers mentioned above, or a batteryminder charger 8)
i just wnana know if those chargers are safe to use w/ ecocharge, pleasae someone, i just wanna get my feelers out there
if i dont snatch uip this ecocharge gp-90 soon, i will prolly just get one from ed at kindkables
Bean I have a powersonic PSC-12800A charger....I use it to charge a 12 volt 7 ah SLA.
I just leave it hooked up all the time....I'm guessing it would work fine with the ecocharge.
Bean - looks like there's minimal direct experience with EcoCharge batts and non-EC chargers. Have you tried calling or emailing the EC folks to ask them directly?
Quote from: Brian Skalinder on May 09, 2004, 11:51:52 PM
Bean - looks like there's minimal direct experience with EcoCharge batts and non-EC chargers. Have you tried calling or emailing the EC folks to ask them directly?
i have emailed marc w/ no avail from SS, since hes like theyre lone rep, but i figured it would werk fine, just really anal obsessive bout batts
thanks brian, i appreciate it, ya made me feel alot better, and if you leave it on i guess its a "float" charger ;)
you pretty much answered my q's
Quote from: BCostigan on May 09, 2004, 12:59:37 PM
Bean I have a powersonic PSC-12800A charger....I use it to charge a 12 volt 7 ah SLA.
I just leave it hooked up all the time....I'm guessing it would work fine with the ecocharge.
brian, i take it that powersonic has a 4-pin end on it, that would save me loads of trouble
actually, it doesnt, i just dont have a single 4-pin to solder on
ummm, ncikpicks, is the batteryminder easy to hack a 4-pin on???
Bean...FWIW the powersonic is real easy to put a 4 pin on. If ya need one let me know.....I have some 4 Pin males here :)
Quote from: BCostigan on May 11, 2004, 07:04:36 AM
Bean...FWIW the powersonic is real easy to put a 4 pin on. If ya need one let me know.....I have some 4 Pin males here :)
hey brian, or anyone really, if i were to purchase the powersonic or xenotronix chargers, does ANY cable come w/ either???
if the lamp style cord comes w/ it and all i need to do is solder a 4-pin on, sounds like a good deal to me!!
if NO lamp style cord comes w/ the cahrgers, where does one obtain some!!!
i need a 12v charger in a pinch, and i have the eco stuff, which is rebranded xeno, so......this seems to be the best quality wise, and no "resting" voltages....