Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: phishmarisol on April 27, 2004, 05:25:29 PM

Title: Getting no signal when I use my AD-20
Post by: phishmarisol on April 27, 2004, 05:25:29 PM

I am testing out my AD-20 before tonight.  Tonight I will be going SBD > AD-20 > JB3.  Right now I am using the dvd player for audio.  I am using an optical cable from the ad-20 to the JB3 and using an analog mini from the dvd to ad-20.  I am thinking this is my problem, and that it is not meant to take this cable.  So is there anything else I should check or should I just try to find some xlr cables?

Title: Re:Getting no signal when I use my AD-20
Post by: Digital Quality on April 27, 2004, 06:14:00 PM

The mini is actually a coax out so it sounds like your signal is not getting in.

Title: Re:Getting no signal when I use my AD-20
Post by: Craig T on April 27, 2004, 06:20:16 PM

you need rca>xlr cables and probably inline attenuators to connect a line level source like the DVD player to the AD20.

Title: Re:Getting no signal when I use my AD-20
Post by: phishmarisol on April 27, 2004, 07:21:28 PM

To radio shack...