Hi,
The last few shows I have recorded with my M10 MK41s and tiny box have been riddled with spots of diginoise. I was wondering if anyone knows what might be the cause of the problem. Any help would be appreciated.
Thanks!
Do you have other capsules that you can test to make sure the MK41s are really the problem here?
Have you tried different cables? Because 9 out of 10 times, problems like these are usually caused by a bad solder joint in a cable connector.
you didn't mention the deck being used either.......
Quote from: Gordon on May 25, 2018, 08:21:52 AM
you didn't mention the deck being used either.......
Looks like M10
Quote from: heathen on May 25, 2018, 08:37:36 AM
Quote from: Gordon on May 25, 2018, 08:21:52 AM
you didn't mention the deck being used either.......
Looks like M10
oops. not enough coffee yet! in that case was the card formatted prior to the shows?
When I first started stealthing, I quickly learned to secure the cable to the recorder so that the mini cable couldn't move at all. Even if the cable is fine, it could create that digi-noise in the recording when it moved around at all.