Taperssection.com
Gear / Technical Help => Remote Power => Topic started by: sleepypedro on May 27, 2004, 12:51:30 PM
-
is there a single SLA cell that can power three devices simultaneously?
mp2 > mod SBM > d8
ACL is around the corner and i'd love to not have to deal with three dozen AA nimh cells!
provided such a beast exists, anyone know how long i could expect to power the three devices in the field?
thanks, this is a really dumb question i realize...
peter
-
i used to power an mp2, adc-20 and d8 off of of a 12amp hour 6 volt sla. it ran at least 2 shows...
they all can do it, you just need to wire in 3 connectors.
-
thanks for the info. being fairly clueless about wiring and electricity in general, how does one wire a third connector?
pwk
-
Are you using a ecocharge w/ fixed jacks or a home brew.
If you got homebrews you could just solder on 3 4pins .
If you got echocharges you could make a Y-splitter for one of the outputs.
-
If you try to run a splitter off of one tap then your fuse may not take the total current draw.
for my home brew, I have two taps comming off the batt w/ each having its own in-line fuse.
fwiw
jah