Text only | Text with Images

Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: voltronic on December 24, 2022, 05:05:29 PM

Title: Alignment jigs?
Post by: voltronic on December 24, 2022, 05:05:29 PM
I'm looking for two things that I can no longer find here:

1. A PDF with various common mic configs that looks like it was made by drafting software. I believe this was a very old post.

2. A mic company I cannot remember that makes knockoffs of Schoeps made an alignment tool of mic configs etched onto lucite or similar.

Thanks!
Title: Re: Alignment jigs?
Post by: phil_er_up on December 25, 2022, 07:38:24 AM
2. A mic company I cannot remember that makes knockoffs of Schoeps made an alignment tool of mic configs etched onto lucite or similar.
========================================
b9 audio - Stereo microphone ruler
https://taperssection.com/index.php?topic=196807.0

Title: Re: Alignment jigs?
Post by: voltronic on December 25, 2022, 08:19:35 AM
Thanks!
Title: Re: Alignment jigs?
Post by: GLouie on December 25, 2022, 12:48:32 PM
One older document with stereo mic drawings is the AES paper by Streicher and Dooley; Basic Stereo Microphone Perspectives - a Review; JAES Vol 33, No 7/8, 1985 July/August.
Title: Re: Alignment jigs?
Post by: voltronic on December 30, 2022, 09:44:23 AM
It turns out the doc I was looking for was already on my computer from years ago (first attachment). For me, this is easier to use than the b9audio ruler because I am using only end-address pencil mics with bodies.

I also found a template doc for ORTF alone.
Title: Re: Alignment jigs?
Post by: phil_er_up on December 31, 2022, 07:42:11 AM
Thats funny that you already had the doc you were looking for volt. Congrats on your new DPA mics. Way to go!!!
Text only | Text with Images