I am tired of switching out duracells.
x2 Audio Technica 4031 > Shure FP24 > Zoom H4n Pro
sometimes i use 2x Berliner CM33
also any recommendations on a sturdy 13 ft pole?
Thanks guys!
Tallentcell lithium ion rechargeable is one of the go to external batteries these days. Available in various sizes, built in meter, charges via 12VDC. The ones I use feature 3 outputs: 12V port, 9V port, 5V USB.
Run the FP24 from the 9 or 12V port. I think H4n requires 5V, so USB for that.
Talentcell all the way. kindms and I have two each of this one: https://www.amazon.com/gp/product/B01337QXMA/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Nice rig!
I have the 9.5 ft Impact and it has been solid. No issues running eight channels on it. This one has a big footprint though.
https://www.bhphotovideo.com/c/product/1273391-REG/impact_ls_13habi_air_cushioned_heavy_duty_light_stand.html (https://www.bhphotovideo.com/c/product/1273391-REG/impact_ls_13habi_air_cushioned_heavy_duty_light_stand.html)
The standard Manfrotto 1004. More expensive, but footprint is about 10 inches less.
https://www.bhphotovideo.com/c/product/644444-REG/Manfrotto_1004BAC_Alu_Master_3_Riser.html/specs (https://www.bhphotovideo.com/c/product/644444-REG/Manfrotto_1004BAC_Alu_Master_3_Riser.html/specs)
You could also throw a pole on top of your current stand for more height.
https://www.bhphotovideo.com/c/product/546540-REG/Manfrotto_099B_3_Section_Extension_Pole_35.html (https://www.bhphotovideo.com/c/product/546540-REG/Manfrotto_099B_3_Section_Extension_Pole_35.html)
do i need a special cable for the Shure FP24 into the battery pack?
This will work with a talentcell.
https://www.amazon.com/gp/product/B083RFSQ63/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Quote from: drfunkenstein2k on December 29, 2022, 02:18:01 AM
do i need a special cable for the Shure FP24 into the battery pack?
Quote from: jbell on December 29, 2022, 08:16:56 AM
This will work with a talentcell.
https://www.amazon.com/gp/product/B083RFSQ63/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Quote from: drfunkenstein2k on December 29, 2022, 02:18:01 AM
do i need a special cable for the Shure FP24 into the battery pack?
all of you folks seem to forget the FP24 has a threaded COAXIAL power connector
NOT a HIROSE... you will most likely have to have a cable made for powering
^^^^^^^^^^^^^^^^^^^^^ yup.
we had Ted make one for us
I am back stateside for a little while, who is Ted and does he still make these power connectors?
Please and Thank you!
Ted Gakadis GAKables
https://taperssection.com/index.php?topic=133186.0
I think hitting him up on FB or PM here for his e-mail address which is how he takes most of his orders iirc.
======================================================================================
Existing Cable Modifications, Rebuilds and Repairs are more then welcome. Please contact me for case by case pricing and recommendations.
Now on Facebook: https://www.facebook.com/GAKables/?ref=aymt_homepage_panel
FREE SHIPPING
Silver Clad or Mini Star-Quad Long Run Snaked Cables Pairs Standard build has 12" unsnaked & untechflexed on the male side (Recorder/Preamp) & 24" unsnaked & untechflexed on the female mic side (allows for at least a 3 foot spread). Fully techflexed cables are no charge but must be requested.
10-15 Foot XLR's(Pair) - 70.00
16-25 Foot XLR's(Pair) - 80.00
**options below
Silver Clad or Mini Star-Quad Interconnect Pairs Snaked or Individual Techflex cables
up to 2 Feet with straight XLR, RCA, or 1/4 - 40.00
**options below
Silver Clad or Mini Star-Quad Y-Cables or Splitters Snaked cables
up to 2 Feet with straight XLR, RCA, 1/4 or 1/8 - 35.00
**options below
OPTIONS
Black Custom Chopped straight or Chopped Right Angle XLR & 1/4" connectors – ADD $5.00 per connector
Stock Right Angle 1/4", RCA & 1/8" Mini Stereo Connectors – ADD $3.00 per connector
Stock Right Angle XLR - Add $5.00 per connector
Offset inputs/outputs - Free
Fully covered techflex cables - Free
External Battery Cables For MANY batteries and pieces of equipment http://taperssection.com/index.php?topic=131680.0
Chopped right angle xlr cables are made to your desired exit position as if looking at a clock. The picture below shows cables exiting at 10:30 with the top being 12:00 (the push release) and the bottom being 6:00 (Pin 3).
Ted does great work!