Print Page - how do you disassemble a switchcraft ta3f?

Title: how do you disassemble a switchcraft ta3f?
Post by: grawk on March 04, 2024, 09:31:05 AM

I'm trying to build some microdot to ta3f cables for my m2d2, but I can't for the life of me figure out how to disassemble the ta3f. Anyone have any tips?

https://imgur.com/a/cmPUNWZ

(https://i.imgur.com/t2qBVb1.jpeg)
(https://i.imgur.com/fW58AN5.jpeg)
(https://i.imgur.com/D3ciNvC.jpeg)

Title: Re: how do you disassemble a switchcraft ta3f?
Post by: DavidPuddy on March 04, 2024, 09:43:00 AM

The assembly should just pull out of the case. Yank on the part that crimps over the cable and it should come right out.

Title: Re: how do you disassemble a switchcraft ta3f?
Post by: grawk on March 04, 2024, 09:47:57 AM

ok, that got it. It was just a LOT tighter than I anticipated. Thanks

Title: Re: how do you disassemble a switchcraft ta3f?
Post by: Sebastian on March 21, 2024, 08:03:36 AM

For reference, here are the instructions straight from Switchcraft: https://www.switchcraft.com/assets/1/27/Assembly_Instructions_Cord_Plugs.pdf?9016

Taperssection.com

Gear / Technical Help => Cables => Topic started by: grawk on March 04, 2024, 09:31:05 AM