Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: one8ung on July 26, 2024, 02:55:33 PM

Title: DPA 4061 with a 3-pin LEMO
Post by: one8ung on July 26, 2024, 02:55:33 PM

Does the DPA 4061 microphone with a 3-pin LEMO connector 3 or 2 wires?

Title: Re: DPA 4061 with a 3-pin LEMO
Post by: Gutbucket on July 26, 2024, 03:02:53 PM

Its only two-wire to the microphone past the connector.  How the 3-pin connector is wired depends on what it was intended to be used with.  Might have one pin bridged to one of the other two or simply unconnected.

Title: Re: DPA 4061 with a 3-pin LEMO
Post by: one8ung on July 26, 2024, 09:04:43 PM

Thank you, that's exactly what I was suspected