Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: depp91 on November 19, 2024, 05:42:11 AM
-
Hey guys, I've got a question about the SP-SPSB-20 battery box, this one:
https://soundprofessionals.com/product/SP-SPSB-20/
Is there any indication on the battery box as to which connection is the input and which is the output? Looking at the pictures on the SP shop, I can't see anything. I wouldn't want to mix up the two and potentially overload the circuits of my recorder...
-
Yeah I have one. The mic input is red.
-
Yeah I have one. The mic input is red.
Ah, thanks!
Somehow that can't be seen on the pictures that are online.
-
It's a good bit of kit.
I also recommend buying some 3.5mm rubber plugs to hide the inputs. Highly unlikely you'll get scrutinized too closely with it, but if you do, the plugs make it look more normal.
-
It's a good bit of kit.
I also recommend buying some 3.5mm rubber plugs to hide the inputs. Highly unlikely you'll get scrutinized too closely with it, but if you do, the plugs make it look more normal.
That's a good piece of advice, thank you! :)
-
Yeah I have one. The mic input is red.
The package from SP arrived today. So just to make sure:
Mic cable goes into the red socket of the battery box. Then another cable goes into black socket of the battery box on one end and the other end goes into the mic input of the recorder. Right?
-
Yeah I have one. The mic input is red.
Ah, thanks!