Taperssection.com

Gear / Technical Help => Post-Processing, Computer / Streaming / Internet Devices & Related Activity => Topic started by: firemt66 on September 12, 2025, 06:24:22 PM

Title: Last night's recording has ALOT of floor noise..
Post by: firemt66 on September 12, 2025, 06:24:22 PM
Hello, last night's Lori Mckenna's show it was a very quiet affair. The three mics, 1 for the two people to sing  into and two others, to mic their guitars, there were no speakers in the balcony. She did say that she wanted this short tour to be like we're singing in my dining room really intimate, and it sure was. But at a cost, very high noise floor. Is there an easy program to eliminate a lot of this? I've googled it. Audacity says it could do it, but at the moment I'm having a problem with that. For some reason, I can't get no volume, and i'm not new with that program.I don't understand all sorts of other programs on the computer has all sorts of volumes, but I can't get volume with that program..ugh! Any hopefully easy tips would be great. It really was a great show, thanks,Scott
Title: Re: Last night's recording has ALOT of floor noise..
Post by: firemt66 on September 12, 2025, 06:26:37 PM
This was the setup last night
Title: Re: Last night's recording has ALOT of floor noise..
Post by: grawk on September 12, 2025, 09:31:34 PM
RX should be able to do it without issue if you have a clean copy of the room sound without them playing
Title: Re: Last night's recording has ALOT of floor noise..
Post by: firemt66 on September 13, 2025, 06:24:54 AM
There's a good 10 second spot where they're not playing or talking,Although I don't have RX..
Title: Re: Last night's recording has ALOT of floor noise..
Post by: firemt66 on September 14, 2025, 12:16:00 PM
Would RX elements have what I'm looking for or do I need to go for the standard edition?
Title: Re: Last night's recording has ALOT of floor noise..
Post by: beatkilla on September 14, 2025, 02:02:05 PM
Should be able to do this with audacity.

Here is a YouTube tutorial

https://youtu.be/bMefnFkCanE?si=08GijtmYVIU2BDOJ


Title: Re: Last night's recording has ALOT of floor noise..
Post by: firemt66 on September 15, 2025, 06:34:13 AM
Should be able to do this with audacity.

Here is a YouTube tutorial

https://youtu.be/bMefnFkCanE?si=08GijtmYVIU2BDOJ
Thanks for the YouTube video. I'll have to check this out. I googled instructions over the weekend for this. But it didn't seem like it was doing what it was supposed to do. I hit okay, but it didn't say that it was processing anything. Maybe it did, and it doesn't come up with a screen that's said it did something. I'm gonna watch this video!
Title: Re: Last night's recording has ALOT of floor noise..
Post by: firemt66 on September 19, 2025, 07:55:42 AM
Okay, I reduced the noise floor noise a good amount.I used setting 8. Is the noise floor able to be lowered almost to nonexistent without affecting the actual sound of the concert? Should I try again with a hire number? Thanks for any info
Title: Re: Last night's recording has ALOT of floor noise..
Post by: rhinowing on September 19, 2025, 11:52:53 AM
Okay, I reduced the noise floor noise a good amount.I used setting 8. Is the noise floor able to be lowered almost to nonexistent without affecting the actual sound of the concert? Should I try again with a hire number? Thanks for any info
Try it with 3-4 different settings until you find a good balance of hiss removal and not effecting the music. So if you like how it sounds on 8, also run it on 7 and 9 to compare. I find NR is most noticeable on cymbals and "ess" sounds/syllables from the vocals

anytime I do an edit that changes the fundamental sound of a tape like EQ or NR, I also make sure to archive the unprocessed recording. Sometimes I go back to them later and I'm not happy with the editing and want to redo