Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: Pieteker on December 10, 2025, 01:04:22 PM

Title: Tips for Open Taping
Post by: Pieteker on December 10, 2025, 01:04:22 PM
I'm thinking about purchasing a Zoom F6 to get into open taping using multiple mic inputs at once. I'm currently using Line Audio microphones (CM3/CM4/OM1) and would love to start experimenting with combining (wide-)cardioid and omni patterns.

What I’m wondering is: what do I need to build a solid open-taping setup in terms of stands, cables, clamps, or other must-have accessories? Since many of you have plenty of experience with open taping, I figured this would be the best place to ask for tips and recommendations.

Thanks in advance!
Title: Re: Tips for Open Taping
Post by: heathen on December 10, 2025, 02:06:21 PM
Your budget is a huge factor for the discussion.  For example, Grace Design makes some outstanding mic bars, but they may be too pricey for some.
Title: Re: Tips for Open Taping
Post by: al w. on December 10, 2025, 03:57:30 PM
One of the things that took me embarrassingly long to figure out was all of the light stand/clamp terminology and how those components fit together. For anyone just starting out, here's a very high level primer:


There's probably a lot more to share, but this is hopefully a good starting point re: stands and clamping
Title: Re: Tips for Open Taping
Post by: Pieteker on December 10, 2025, 04:07:22 PM
Quote from: al w. on December 10, 2025, 03:57:30 PM
One of the things that took me embarrassingly long to figure out was all of the light stand/clamp terminology and how those components fit together. For anyone just starting out, here's a very high level primer:

  • Most tapers use light stands instead of microphone stands or camera tripods
  • Most light stands have a stud/spigot at the top with either a 3/8" or 1/4" thread. Others may have a stud receptacle with a removable stud. Here's an example (https://www.bhphotovideo.com/c/product/1375395-REG/impact_heavy_duty_air_cushioned_light.html)
  • If your mics are mounted on a stereo bar (https://rode.com/en-us/products/stereo-bar), you can either screw it directly onto the thread OR screw it on to a rapid adapter (https://www.bhphotovideo.com/c/product/824403-REG/Impact_ca_102_Rapid_Baby_to_3_8.html) which you can then attach to the stud (preferred, by me at least! Rapid adapters are useful for all sorts of things. Man, it took me too long to figure out what they were called, lol)
  • You can also build your own stereo bar - look for 15mm or 16mm rod sets (https://www.9.solutions/products-2/grip-rigging-system-2/) typically used for rigging video cameras and such
  • Speaking of stereo bars - you can use a regular stereo bar which works fine or you can use a custom 3D-printed mount (https://www.ebay.com/str/srsrecordingservices) designed to hold two (or more!) microphones, mounted in a single shock mount (typically a Rycote (https://www.bhphotovideo.com/c/product/554999-REG/Rycote_041107_INV_7_InVision_Indoor_Microphone.html), but the smaller active mounts fit in the Shure donut (https://www.bhphotovideo.com/c/product/68622-REG/Shure_A53M_A53M_Isolation_and_Swivel.html). I personally prefer combining Scott's lyre base (https://www.ebay.com/itm/135171640465?_skw=rycote&itmmeta=01KC50138F9KNQN4WZH00Y3EED&hash=item1f78db8c91:g:vC8AAOSwH4xmqZQb) and a pair of standalone Rycote lyres (https://www.adorama.com/ry042255.html) into a custom shock mount that is perfectly symmetrical)
  • There's a whole thread about clamping, but my tl;dr is: 9.solutions Savior Clamp w/ Socket (https://www.bhphotovideo.com/c/product/1426914-REG/9_solutions_9_xs1005b_savior_clamp_with_socket.html) + a stud (https://www.bhphotovideo.com/c/product/824363-REG/Impact_srp_105_Standard_Stud_for_Super.html) or spigot (https://www.bhphotovideo.com/c/product/824397-REG/Impact_ca_100_Double_End_Spigot_with.html) + a magic arm (https://www.bhphotovideo.com/c/product/325444-REG/Manfrotto_244N_244N_Variable_Friction_Magic.html) OR a Matthews short extension (https://www.bhphotovideo.com/c/product/33185-REG/Matthews_429499_Telescopic_Baby_Stand_Extension.html) OR a Manfrotto extension pole (https://www.bhphotovideo.com/c/product/546540-REG/Manfrotto_099B_3_Section_Extension_Pole_35.html) - and then just mount your mics to that just like you would a stand

There's probably a lot more to share, but this is hopefully a good starting point re: stands and clamping

I can’t say thank you enough for this detailed answer, man. This will help me a lot. It’ll take some time to study all of this, but I’ve got all the time in the world.
Title: Re: Tips for Open Taping
Post by: grawk on December 10, 2025, 04:22:29 PM
for flexible stereo in open setups:

https://reverb.com/item/63429141-gravity-cases-ms-stb-01-pro-stereo-array-2-microphone-bar-mount-stand

for REALLY flexible stereo in open setups:

https://www.ebay.com/itm/135695612553
plus a 20mm diameter carbon tube of your choice

Rycote or Radius shock mounts

shure A53M shock mounts

various custom to your setup SRS 3d printed mounts make things really easy.

I have a 17' lighting stand for REALLY open, and several assorted smaller lighting stands

For "small footprint", a monopod with a micro tripod base works pretty well

I use the Matthews baby extension, 9 solutions super clamp, and several other utility options for clamping to various things

Honestly, go through this sub-forum, there's a lot of information already there.

Mostly, just experiment.  You might figure something out better than anyone else before you has.
Title: Re: Tips for Open Taping
Post by: VibrationOfLife on December 10, 2025, 07:19:07 PM
Not affiliated, nor is it my style, but something to look at: https://www.youtube.com/watch?v=sG3SsQbGhOg
Title: Re: Tips for Open Taping
Post by: if_then_else on December 27, 2025, 03:46:23 AM
Late reply, but this is a “minimalist” (by my own standards) 5‑channel on‑stage rig for a little open‑taping tour in Italy in January. This is built mostly from generic photo/film hardware.

Base is a Manfrotto 003 Backlite floor stand with a Dado‑style junction block on top (Manfrotto MSY058A or a Selens‑type clone). Through that I run a pair of 30 cm / 15 mm threaded rig rods as the main crossbar. The *only* things held by generic 15 mm rod clamps are the two outriggers: DPA 4061s on their 1.6 mm cables, mounted at the bar ends. The center mic is a Microtech Gefell M 310 in a Rycote InVision INV‑6, and in front is the NOS pair of MBHO subcardioids on active cables, on Scott’s custom Shapeways NOS bar in a Rycote INV‑7.

For the 4061s I use a Nitze camera cable clamp with 2 mm cable channels that can be locked; that size is perfect to grab the 1.6 mm DPA cables securely.

Most of the grip bits (rods, clamps, etc.) are generic and sold under names like Walimex, ayex, Selens, Nitze or no‑name equivalents on Amazon, eBay or Alibaba. The whole rig breaks down into the Backlite base, Dado, a few short rods, the NOS bar and clamps, so it packs easily and stays train‑friendly.
Title: Re: Tips for Open Taping
Post by: Pieteker on December 27, 2025, 01:49:26 PM
Thank you so much! Very informative.
Title: Re: Tips for Open Taping
Post by: aaronji on December 27, 2025, 05:02:01 PM
It depends a lot on the venue, both in terms of what works and what they will allow. If you can feasibly use a stand, all you need is a stand, a mic bar (and mic clips), long enough cables, and some velcro strips (or whatever) for cable management. If you want to be prepared for whatever various situations you may encounter (on-stage, clamping, small footprint), the list grows.

I would suggest the following; they are all Manfrotto part numbers but there are similar items available from a bunch of other companies, like Impact. So: 1004BAC (stand that goes pretty high and you can adjust the footprint within reason), an 035 (SuperClamp), a 386B-1 (NanoClamp), an 003 (stand base), a 122B (short extension pole), an 099B (long extension pole), and an 026 (umbrella adaptor). Plus a bunch of spigots and some rapid adapters. Safety cables for any clamping. Add in a 6" end-grip Mathellini clamp, and you are good to go for basically any situation you would usually encounter, from low-profile on-stage (003 plus a spigot plus the bar); to clamping up, down, at an angle, or to another stand (one of the clamps, maybe an extension pole, maybe a rapid adaptor,  maybe the umbrella adaptor for non-right angles), to limited footprint spaces (003 + 122B + 099B). The engineer/tour manager for Julian Lage calls it my "TinkerToy set". Of course, I try not to carry all of that stuff, but sometimes you have no clue what you will encounter.

For mic bars, with extensive flexibility and great quality at a (comparitively) reasonable price, try Robert at https://mikrofonschiene.de (https://mikrofonschiene.de). The "Basic AB" or "Set 1" would probably be good options, with extra screws as needed.

Lastly, I would suggest making at least a few runs with just a pair before you leap into multiple pairs (especially given wide-ish cards and omnis). The first few times can be a little stressful, even if you have practiced in the living room. Add the hassles of unanticipated venue requirements, people running around, and a dark room (small flashlight, by the way), and it can be a challenge at first.