Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: gotfob on July 06, 2004, 05:53:03 PM

Title: V3 users step in......
Post by: gotfob on July 06, 2004, 05:53:03 PM

 >:D

Title: Re: V3 users step in......
Post by: Tim on July 06, 2004, 05:55:55 PM

I've run line in a few times with the u89s/m148... the u89s output a very, very low signal.. combined with the m148(+20db) i did NOT have to flip the -20db switch.

Friends with schoeps have reported the same and Bean ran 481->m148->V3 for a Phish shows also without having to engage the switch.

I'd be more concerned if running line in from a SBD

Title: Re: V3 users step in......
Post by: Brian Skalinder on July 06, 2004, 05:58:56 PM

Never run SBD/line-in on the V3, I can't remember the last time I had a SBD patch.  Curious to hear what people's experiences have been...

Title: Re: V3 users step in......
Post by: cbd on July 06, 2004, 06:41:39 PM

I've run it in a couple times. turn off the phantom as you said. actually ran a little gain on it, unbalanced XLKR's out, it sounded pretty good I think

Title: Re: V3 users step in......
Post by: John R on July 07, 2004, 01:02:44 AM

i've done it a bunch.  just need to run levels low.

jr