Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: rowjimmytour on July 15, 2004, 08:56:46 PM
-
Can I make a 5/8">3/8" adapter for T-bar @ my local home depot?
-
Can I make a 5/8">3/8" adapter for T-bar @ my local home depot?
3/8 F > 5/8 M are pretty cheap at most audio/video or camera shops. around $3 or so.
marc
-
I looked around at harware stores and they don't carry the 5/8 27 thread size. As Leegeddy mentioned, a local camera show would be your best bet.
-
I need 5/8"F>3/8"M actually!
Peace
-
I need 5/8"F>3/8"M actually!
Peace
ahh see...
saw this one at: http://www.micsupply.com/standaccessories.htm
5/8 to 3/8 adapter Some shock mounts require a 3/8 male thread. This adapter converts 5/8 to 3/8. $5
(http://www.micsupply.com/58to38.jpg)
marc
-
Thanks, just called Dave on the phone!