Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: L Ron Hoover on July 20, 2004, 11:03:31 PM

Title: MG300/M200/210>PS2>MSBM1?
Post by: L Ron Hoover on July 20, 2004, 11:03:31 PM

Has anyone tried it? Are the mics hot enough?

Title: Re: MG300/M200/210>PS2>MSBM1?
Post by: F.O.Bean on July 20, 2004, 11:18:12 PM

well, a mod can be done to the sbm1 to boost levels by 6 db FWIW too :)

so that may make it hot enuf ;)

Title: Re: MG300/M200/210>PS2>MSBM1?
Post by: nickgregory on July 21, 2004, 10:16:13 AM

I have not tried it (I am currently running M200s->MP2->Mod SBM1), but I will say these mics are hot.  Running the MP2 on no gain, using XLR outs to the SBM - the most I can get to is 3 or 4 on the SBM dial. 

Title: Re: MG300/M200/210>PS2>MSBM1?
Post by: gewwang on July 21, 2004, 10:58:18 AM

Yes, the m210s are the hottest of the mics I've run. With the Beyer or the Sax going into a sbm-1, I always had the MV100 set to +20 (the minimum) and the sbm was at +4 and a few times below that. The Sax could go from 0 - +76 and I never had it about +20.