Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: wsphansam on July 21, 2004, 04:50:42 PM

Title: Stealthing questions
Post by: wsphansam on July 21, 2004, 04:50:42 PM

So my setup for stealthing is SP mod AT933>SP batt box with dual level sliders>AD-20>JB3. So with this I'd be recording w/ optical in.

When adding gain to the signal, do I want to use the AD-20 or the level slides on the battery box? Also the battery box I have has the multiple bass roll off functions (16,69,95,107,160,195,888) and then the 29dB, 50dB, and 0dB switch. Can somebody tell me what roll off frequency and switch to use at say your average sounding show, not ridiculously loud, not too soft.

Title: Re: Stealthing questions
Post by: seekup40 on July 21, 2004, 04:56:06 PM

for dmb i run my bass roll off at 95 hz and i run at853s > battery box > ad-20 > d8

Title: Re: Stealthing questions
Post by: Sean Gallemore on July 21, 2004, 05:08:28 PM

i would turn the slides on the battery box all the way down, but that is something you are going to have to figure out on your own.

Title: Re: Stealthing questions
Post by: jkoch on July 21, 2004, 07:58:37 PM

i'd also say to turn the batt box slides all the way down. ad20 tends to run really hot too. but, it's what you think works best for any given show..

Title: Re: Stealthing questions
Post by: som on July 22, 2004, 05:57:19 PM

wsphansam, I laugh everytime I see your avatar!  :D

+T

Title: Re: Stealthing questions
Post by: Chapper on July 22, 2004, 06:13:31 PM

I get a boner everytime I see Schwilly's avatar....

Title: Re: Stealthing questions
Post by: wsphansam on July 23, 2004, 01:47:41 AM

Back atcha Som. +T