Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: hhf32 on August 02, 2004, 09:51:20 AM

Title: Question on AKG 391's?
Post by: hhf32 on August 02, 2004, 09:51:20 AM

I have a question on the selectable switch on this mic. Is it a raised switch or recessed? I bought one off ebay and can't tell from any pics I can find on the mic. I'm just not sure if the switch broke off or if it's supposed to be recessed.
   Thanks for the help!!

Title: Re: Question on AKG 391's?
Post by: nic on August 02, 2004, 10:01:08 AM

its recessed: flat, HPF, -10db pad

Title: Re: Question on AKG 391's?
Post by: hhf32 on August 02, 2004, 10:41:54 AM

Thanks for the reply, I was worried that the switch was broken!!

Title: Re: Question on AKG 391's?
Post by: jkoch on August 05, 2004, 06:15:16 PM

nope,you're good. did you get those ones from the UK?

Title: Re: Question on AKG 391's?
Post by: grider on August 05, 2004, 06:38:23 PM

its a recessed switch, you must use a pen or other device to change its setting, its the same way on the 480's too, I've owned both ;)

Title: Re: Question on AKG 391's?
Post by: hhf32 on August 06, 2004, 11:42:08 PM

Thanks for the help. I just wanted to make sure. I did'nt get the one's from the uk but I do have a pair now. I can't wait to try them out!!

Title: Re: Question on AKG 391's?
Post by: jkoch on August 07, 2004, 07:55:03 PM

Quote from: hhf32 on August 06, 2004, 11:42:08 PM

Thanks for the help. I just wanted to make sure. I did'nt get the one's from the uk but I do have a pair now. I can't wait to try them out!!

just checking cause there were a few on ebay for about $160 each +shipping/duty/etc from the UK on ebay a few days ago