Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: DMaCATO on August 09, 2004, 05:45:28 PM

Title: Optical Problem
Post by: DMaCATO on August 09, 2004, 05:45:28 PM

I looked through the archives, but didn't find anything about this particular topic.

I have a brand new UA-5 and a Used (ebay) JB3.  I have recorded stuff to my computer, and finally got the Optical cable from radio shack + adapter.

When trying to record to the JB3, i set it to optical in/wav and nothing. The UA-5 is not modified, so it is still connected to the computer. but nothing is happening on the JB3.

It goes preparing the recording, to recording, to saveing.. but nothing?

Any thoughts?  Did I get ripped off?

Thanks,
Drew

Title: Re: Optical Problem
Post by: jpschust on August 09, 2004, 07:44:00 PM

few things.  first are you getting the light coming out of the optical out on the ua-5?  that light should come through if you are conencted to the computer.

second, update your firmware.

Title: Re: Optical Problem
Post by: DMaCATO on August 09, 2004, 08:27:49 PM

Firmware for the JB3 is the latest.. 1.40 or something.. and lastly, Red Light out of the optical is on.  Any other Ideas?

Still no love?! 

Thank you,
Drew

Title: Re: Optical Problem
Post by: dklein on August 10, 2004, 01:13:18 AM

Is the UA-5 selected as the output device for your pc sound?

Title: Re: Optical Problem
Post by: DMaCATO on August 10, 2004, 11:09:49 AM

Thanks guys for all your help... but I said F*&k it and went ahead and modded the UA-5 anyway. I only wanted to make sure everything worked before I modded it, but since i couldn't figure out the USB out to the UA-5 I went ahead and modded it anyway.

Everything is operational, patient survived!! Recoreded some stuff on the JB3 this morning and played it back. Nice.

Thanks for all your input!!

Drew.