Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: owen on September 12, 2004, 03:24:49 PM
-
some new gear in the next few months here is a list of stuff i might buy.
PS-2
AKG se300b/ck91
JB3
I was wondering if there is anything els that i might need,
-
cables
-
I Got that :P
Im runing C1000s>d-8 Now
has anyone around here ever use the se300b/ck91's ?
-
justin
i used the 391's and really liked the results. they were good indoors and out. some times i wish i still had them.
definately a step up from the c1000's
-
yeah ive been waiting for a good year to upgrade, :)
thanks for the info
-
i'm still using them, sometimes they get a bit boomy, but not bad, i like them outside a lot more than inside. DIN almost always sounds good with them, but ortf outside is nice when center and fob.
-
maybe an ad-20 to go with it?
-
where would i get one ?
-
would a mixpad 4 work insted of the ps-2 and ad-20 ?
-
The mixpad 4 only gives 18v phantom. I bet the PS2/AD20 would sound better. I have a couple of Jackmormons shows that are 391>PS2>AD20 and think they sound nice.
-
how much does the ps-2 or ad-20 put out ?
-
shockmounts if you don't already have them, tensimounts are cheap and work with the 390's. I believe the PS-2 puts out 48v, ad-20 doesnt put out anything it just allows you to adjust the gain.
-
yep i got ya I think i knew that one ;)
And yeah ive got shockmounts already.
-
yep i got ya I think i knew that one ;)
And yeah ive got shockmounts already.
just mentioning, bc i think you mentioned that you were running c1000's which dont need them, and i completly forgot about shockmounts when i upgraded even though I knew what they did and stuff, just so used to not using them. Good luck.
-
Right on Thanks for the help. ;)
-
The mixpad 4 only gives 18v phantom. I bet the PS2/AD20 would sound better. I have a couple of Jackmormons shows that are 391>PS2>AD20 and think they sound nice.
the se300's only need 18v's so the mixpad would work.
-
The mixpad 4 only gives 18v phantom. I bet the PS2/AD20 would sound better. I have a couple of Jackmormons shows that are 391>PS2>AD20 and think they sound nice.
the se300's only need 18v's so the mixpad would work.
Relly? Right on thanks +T ;)
-
UA-5 would be worth considering too. ;D
Josh
-
but for a more lo-pro setup, id gop 39x>ps2>ad20>jb3 :)
-
how long can a psp-2 usually go on a new battery? seems like it would die quickly, but a lot of people use them, so maybe not...
of course, it depends on the power dray of the mics, but I am wonderin just in general
-
how long can a psp-2 usually go on a new battery? seems like it would die quickly, but a lot of people use them, so maybe not...
of course, it depends on the power dray of the mics, but I am wonderin just in general
Yes good qustion i was just wondering the same. ;)
-
thats a lil much justin, id stick w/ a ps2, not a psp2 :)
-
thats a lil much justin, id stick w/ a ps2, not a psp2 :)
I Hear Ya :P
-
how long can a psp-2 usually go on a new battery? seems like it would die quickly, but a lot of people use them, so maybe not...
of course, it depends on the power dray of the mics, but I am wonderin just in general
I think about 4 hours max with AT853s is what I get on a new 9V with my PS2