Taperssection.com
Gear / Technical Help => Ask The Tapers => Topic started by: drjay on September 14, 2004, 02:48:32 PM
-
ok everyone was helpful with my dat questions, so i thought id ask this.i need a soudcard that i can connect the digital out on the dat to transfer to my computer. recommendations?i have the 7 pin cable that goes to the digital in: but my existing audigy 2 soundcard only has analog into mini phone jack.ok also what program is easiest to create tracks and can i download any where?or what do i need to buy cd wave or soundforge?
-
ok everyone was helpful with my dat questions, so i thought id ask this.i need a soudcard that i can connect the digital out on the dat to transfer to my computer. recommendations?i have the 7 pin cable that goes to the digital in: but my existing audigy 2 soundcard only has analog into mini phone jack.ok also what program is easiest to create tracks and can i download any where?or what do i need to buy cd wave or soundforge?
EVERY soundcard made by Creative Soundblaster is a piece of crap. THrow it in the garbage before you ruin anymore music...
Read this: http://www.etree.org/faq_dat-cdr.html
The easiest thing to do is:
DAT>Bit Perfect Soundcard (see etree link)>recording program (CDWave is free)>CDWave (tracking)>WAV
Check out the Seeding Guidlines at wiki.etree.org. They will help you lots...
Terry
-
m-audiophile 2496 pci card :)
it can be had for under $100 new
-
My emi 2|6. It can be had for $100 used. :P
-
Like I said, I use Zoltrix:
http://www.digit-life.com/articles/zoltrixpro6/
-
any that connect via firewire?
-
the m-audio firewire audiophile :)
-
is that one that has the digital in from a 7 pin out on the dat?