Taperssection.com
Gear / Technical Help => Post-Processing, Computer / Streaming / Internet Devices & Related Activity => Topic started by: SonicSound on September 20, 2004, 07:49:01 PM
-
Just did my first 24/96 recording last night. The first set went smooth, however during the second set they lost power. After the power went off, my laptop was still powered (battery backup), V3 power on (battery powered), FW410 power off (powered by outlet). As a result when I go to open the file (wavelab 4) that was recorded, a 1.40gb .wav file exists however no audio or wave info. Is there any hope?
-
have you tried opening it as a .raw file?
im not sure if this is relevent, but the issues with the auto split do that, they save the file but it seems as if there is no data there, and you just ahve to open it as a raw faile and save as .wav
-
have you tried opening it as a .raw file?
im not sure if this is relevent, but the issues with the auto split do that, they save the file but it seems as if there is no data there, and you just ahve to open it as a raw faile and save as .wav
I could not find a .raw file. Any other sugestions?
-
the header information is messed up. Although there is probably a way to have WaveLab or another program fix it, there's a cool little tool Gordon Gidluck wrote that will recreate the header information. I have used it in similar situations with success. I looked briefly for a link on google to it but could not find it. It's called audiohack, or wavehack or something along those lines. I believe the text files say it can be freely distributed so PM me if you can't find it and I can send you a copy this evening.
-
If you have SF6 it is a bit easier to open as a raw file.
Be sure and specify the sample rate and bit depth you wish to open the file as or it will sound like Alvin.
-
I did a search of my files for *.raw and *.$$$ files and no such file existed. Should I just give up or is there still hope?
-
the header information is messed up. Although there is probably a way to have WaveLab or another program fix it, there's a cool little tool Gordon Gidluck wrote that will recreate the header information. I have used it in similar situations with success. I looked briefly for a link on google to it but could not find it. It's called audiohack, or wavehack or something along those lines. I believe the text files say it can be freely distributed so PM me if you can't find it and I can send you a copy this evening.
-
the header information is messed up. Although there is probably a way to have WaveLab or another program fix it, there's a cool little tool Gordon Gidluck wrote that will recreate the header information. I have used it in similar situations with success. I looked briefly for a link on google to it but could not find it. It's called audiohack, or wavehack or something along those lines. I believe the text files say it can be freely distributed so PM me if you can't find it and I can send you a copy this evening.
Sent PM
-
I imagine you've found guidluck's tool but, here's how to fix it in sound forge or Wavelab: The file isn't actually a RAW file, it's a WAV file with a corrupt header. RAW means just that, raw PCM without a header. Open sf/wavelab>open wav, change the file type @ the bottom from WAV to RAW & then choose your corrupt file. It will then prompt you to insert the correct file attributes (ie: stereo, 24 bit, 48,000hz, little endian). I believe the only file type that uses Big endian are Sound designer II files. Hope this helps.
-
I imagine you've found guidluck's tool but, here's how to fix it in sound forge or Wavelab: The file isn't actually a RAW file, it's a WAV file with a corrupt header. RAW means just that, raw PCM without a header. Open sf/wavelab>open wav, change the file type @ the bottom from WAV to RAW & then choose your corrupt file. It will then prompt you to insert the correct file attributes (ie: stereo, 24 bit, 48,000hz, little endian). I believe the only file type that uses Big endian are Sound designer II files. Hope this helps.
Well before I read your message I was able to figure it out (Though your explanation may be better). Thanks
SOLVED! I just figured it out. If you use the Import special Audio File (accessed from the file open icon / folder symbol) and specify in the specs bit = 24 sample rate 96,click ok, and then click the wav file in question all is well.
-
glad you got it figured out!
-
Good deal, nothing like retrieving data you thought was lost.