could i do this AT933s>some kind of batt box>D100?
THANKS
Raphael
you can do that but you might run into some problems if you have to run mic-in.
Quote from: nmculbreth on September 27, 2004, 06:27:13 PM
you can do that but you might run into some problems if you have to run mic-in.
can i ask what kind problems?
Raphael
Quote from: setboy on September 27, 2004, 06:33:33 PM
Quote from: nmculbreth on September 27, 2004, 06:27:13 PM
you can do that but you might run into some problems if you have to run mic-in.
can i ask what kind problems?
Raphael
if you have to run mic-in you'll run into brickwalling but if you can run line-in you'll be golden.
Quote from: nmculbreth on September 27, 2004, 06:50:53 PM
Quote from: setboy on September 27, 2004, 06:33:33 PM
Quote from: nmculbreth on September 27, 2004, 06:27:13 PM
you can do that but you might run into some problems if you have to run mic-in.
can i ask what kind problems?
Raphael
if you have to run mic-in you'll run into brickwalling but if you can run line-in you'll be golden.
ok thanks and +T
one more thing
what would make it so i can or can not run line-in
Thanks
Raphael
All "can" referrs to is having mics that are sensitive enough to provide acceptable levels when running line in.
analog "brickwall" distortion will occur on a sony portable if you need to turn the levels down to 4 or lower to keep from clipping when running mic in.
the signal coming from the mics is too hot for the mic input on the DAT
ok i think i got it now :D
Thanks for all the help
Raphael