Taperssection.com
Gear / Technical Help => Microphones & Setup => Topic started by: hexyjones on October 18, 2004, 12:12:07 PM
-
Say you had 4 of the same mic and wanted to pick two best matched....
Any worthwhile at home matching tests/setups?
-
Say you had 4 of the same mic and wanted to pick two best matched....
Any worthwhile at home matching tests/setups?
i tested the modified Naks i have. here's what i did:
-minimize as much of the variables as possible
-use only 1 channel of your pre.
-1khz test tone
-sound source volume at a constant.
-mics at a fixed distance from the sound source (speaker)
-shut all your doors/windows
marc
-
Everything Marc said except I'd run a slow log frequency sweep and some pink noise instead of just measuring at 1 kHz.
Set up one mic on a stand, then switch mics. Don't change anything - just record one channel. Set the playback volume and gain once only.
You can generate the test tones in cool edit pro and look at frequency analysis there as well.
I've also just started playing with the free RightMark Audio Analyzer - might be worth checking out if you have a audio interface for your pc. http://audio.rightmark.org
-
Everything Marc said except I'd run a slow log frequency sweep and some pink noise instead of just measuring at 1 kHz.
Set up one mic on a stand, then switch mics. Don't change anything - just record one channel. Set the playback volume and gain once only.
You can generate the test tones in cool edit pro and look at frequency analysis there as well.
I've also just started playing with the free RightMark Audio Analyzer - might be worth checking out if you have a audio interface for your pc. http://audio.rightmark.org
i agree. pink noise & sine sweep are good too.
marc