Text only | Text with Images

Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: Mike Pering on October 19, 2004, 01:38:42 PM

Title: Nomadic Jukebox 3 --recording from Soundboard
Post by: Mike Pering on October 19, 2004, 01:38:42 PM
Hi Folks---I will shortly be making a recording direct from a soundboard at an upcoming live gig and although I have found out what leads I will need does anyone know what input gain settings I am likely to have to set the JB3 machine at.If anyone has any experience at having done this before I would be greatful fo any input.-------Cheers ------Mike Pering
Title: Re: Nomadic Jukebox 3 --recording from Soundboard
Post by: The Kilted Taper on October 19, 2004, 01:42:46 PM
Depends on the output of the board. I would suggest leaving it at 0dB and making adjustments in post. But that's just me....
Title: Re: Nomadic Jukebox 3 --recording from Soundboard
Post by: jessedscott on October 19, 2004, 01:44:51 PM
 :-X







Title: Re: Nomadic Jukebox 3 --recording from Soundboard
Post by: The Kilted Taper on October 19, 2004, 02:00:13 PM
the question wasn't about cables, but where the gain should be set on the JB3.
Title: Re: Nomadic Jukebox 3 --recording from Soundboard
Post by: jessedscott on October 19, 2004, 02:09:34 PM
oopps my bad... :-X
Title: Re: Nomadic Jukebox 3 --recording from Soundboard
Post by: The Kilted Taper on October 19, 2004, 02:10:53 PM
It happens to the best of us!  ;D
Title: Re: Nomadic Jukebox 3 --recording from Soundboard
Post by: jessedscott on October 19, 2004, 02:12:44 PM
I was think about a ton of stuff when i was reading the post. I say set the environment to BATH  ROOM ;D
Text only | Text with Images