Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: urobouros on October 22, 2004, 01:41:16 PM

Title: What is the cheapest way to run two mics into an MZ-R909 MD?
Post by: urobouros on October 22, 2004, 01:41:16 PM

I have one Sony ECM-907S and was thinking of getting another for my open rig.  I'm running into a MZ-R909 MD recorder.  I have an extremely limited budget and no experience.  Any suggestions?

Thanks

Todd

Title: Re: What is the cheapest way to run two mics into an MZ-R909 MD?
Post by: Nick Graham on October 22, 2004, 02:51:28 PM

I'm not sure what the ECM-907S cable terminates in...if it's XLR, a simple XLR>Mini Plug Y adapter would work:

http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=286756&is=REG

If they terminate in a miniplug already, then a 2 female mini>1 male mini Y cable will do the trick:

http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=134130&is=REG

If they're 1/4", this will do it:

http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=134147&is=REG

Hope this helps...

Title: Re: What is the cheapest way to run two mics into an MZ-R909 MD?
Post by: urobouros on October 22, 2004, 06:52:22 PM

It helps quite a bit.

Thanks!

Todd

Title: Re: What is the best way to run two mics into an MZ-R909 MD?
Post by: urobouros on October 25, 2004, 12:10:33 PM

What would be the best way to run two mics in.  The mics terminate in a 1/8" stereo plug. 

Thanks!