Taperssection.com
Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: Kevin on May 20, 2003, 10:06:24 PM
-
I just purchased two C391B Akg mics and wanted to know what else I should get inbetween them and the recorder. Thanks for the help
Kevin
-
I have run
393>sax>Mod SBM>D100
391(3)>B-18 power supply>AT CP8201 transformers>Mod SBM>D100
391(3)>MP2>Mod SBM1>D100
and truth be told I like the mp2>sbm combo the most, of course this probably has something to do with it being my current rig ;D
honestly though I made some great tapes with no pre and using the transformers.
Best advice I can give you is to check some of it out yourself. PM me and I can set you up with some sample tracks...dave matthews, Pat McGee, Toad the Wet Sprocket, Cast Iron Filter, Particle, New Monsoon, quite a few local bands....let me know.
-
Preciate it. Sure some Particle would be nice and if you want some shows be glad to hook it up www.phishhook.com/lists/kevnm67, are you familiar with mixers? if i just had a mixer in between my mics and recorder what that help enhance the signal for a better recording?
-
Not really. Mixers in my opinion are meant to use at least three sources, hence the mixing aspect of it. With that rig...hmm, I think something with a little color would do you well. I have heard a bunch of akg->v2 tapes and never really liked them. I would try an mp2 and see how you like it. As far as a/d's...APOGEE, did I say that loud enough? You might be able to pick up an ad1000 from a memnber of this sbd and run with the internal pre. I have a bunch of samples of mbho->ad1k which all smoke!
Daryan
-
I ran the 391 > B18 > SBM-1 > D8 for a long time. There is at least one moe. show in circulation from Austin with this setup. I later sold the B18 units and put the Wendt X2 there, Again, there is at least one moe. show from Austin like that (391 > X2 > SBM-1 > D8). I personally don't want a lot of coloration in my sound, that's why I chose the Wendt pre-amp (it also doesn't hurt that Bob has sold a ton of these to movie and film people -- every offer I had when I sold it was to either video or film production folks).
I honestly didn't think going from the B18 PS to the Wendt affected the sound a great deal. I heard a much greater difference when I got the Line mod done to the SBM-1 later.
Wayne