Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: vicsbitz on December 18, 2004, 04:38:29 PM

Title: HELP PLEASE, POOR RECORDING
Post by: vicsbitz on December 18, 2004, 04:38:29 PM

Hi,i am new to taping shows, i taped my fourth show on thursday the other three went very well,they were all at the same venue,however on thursday the concert was at a different venue,missed the support so i set levels to what i had used before,anyway the bottom line is the levels were way too high and i am left with a very distorted recording,

can anyone point me in the right direction to try and clean it up a bit,i have cool edit and sound forge but i am only familiar with the basics.

thanks in advance

Title: Re: HELP PLEASE, POOR RECORDING
Post by: Billy Mumphrey on December 18, 2004, 04:47:28 PM

in CEP you can try messing around with Clip Restoration, I believe it's under effects > noise reduction. try some of the presets and see what happens.

Title: Re: HELP PLEASE, POOR RECORDING
Post by: Brian Skalinder on December 18, 2004, 04:48:40 PM

If it's heavily clipped - and it sounds like it is - there isn't a whole lot you can do.  I've found the Clip Restoration function in CEP marginally effective, at best.  IMO, I'd write-off the recording and look forward to the next one.

Title: Re: HELP PLEASE, POOR RECORDING
Post by: vicsbitz on December 18, 2004, 04:53:02 PM

thanks for the help,although i am beginning to think brians last bit of advice might be the best

Title: Re: HELP PLEASE, POOR RECORDING
Post by: caymanreview on December 18, 2004, 04:58:14 PM

you might try, you never know.

always worth a shot. and in trying you will learn more about your software that will come in handy down the road ;)