Print Page - Signal Converter Box Question involving the jb3

Title: Signal Converter Box Question involving the jb3
Post by: Flynn on January 06, 2005, 06:45:29 PM

OK so here is the thing. I will be useing the Nomad jb3 for patching only....

Which box would be better suited for what I would like to do???

A Coax>Opti converter box, or...

the aes>opti converter box.

Is one any better than the other??? I would also like to be able to pass the signal along down the line. Any suggestions???

Thanks in advance everybody
-Flynn

Title: Re: Signal Converter Box Question involving the jb3
Post by: dnsacks on January 06, 2005, 06:47:40 PM

if you're merely patching, the HOSA coax>optical converter box is what you want to get. It will not let you pass a signal on to others, but the addition of a coax splitter willl.

Coax (spdif) is the standard for digital signal transmission at shows, AES is less common

Title: Re: Signal Converter Box Question involving the jb3
Post by: Flynn on January 06, 2005, 07:03:30 PM

thanks a bunch, that's what I was looking for

Title: Re: Signal Converter Box Question involving the jb3
Post by: Gordon on January 06, 2005, 07:24:23 PM

I was about to send you over here ;)

Title: Re: Signal Converter Box Question involving the jb3
Post by: Gordon on January 06, 2005, 07:25:24 PM

now keep you eye in the yard sale section for one.

Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: Flynn on January 06, 2005, 06:45:29 PM