Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: T.J. on January 13, 2005, 09:48:22 PM

Title: stand advice regarding a bogen 3322
Post by: T.J. on January 13, 2005, 09:48:22 PM

looking for a little help from someone with more knowledge of this stand. i have read in one archival post that the footprint for most stands can be reduced by not extending the legs fully.  this also increases the overall height of the stand slightly. can this be done with a bogen 3322 with it still being stable? the reason i ask is because the footprint diameter of this particular stand is 42.1 inches. that could be a little too big for me to deal with. but if i can reduce this length by not extending them fully, the problem would be eliminated. i don't want to go out and buy one and then find it is not what i wanted. thanks in advance...

Title: Re: stand advice regarding a bogen 3322
Post by: bhtoque on January 13, 2005, 10:03:57 PM

Not sure how the 3322 is built, but check out this other stand thread where I posted pics on the trick to keep the footprint under a foot.

http://www.taperssection.com/yabbse/index.php?topic=33577.msg426647#msg426647

JAson

Title: Re: stand advice regarding a bogen 3322
Post by: T.J. on January 14, 2005, 12:49:46 AM

it seems like a trick that should work with the 3322 as well. +t for the advise. it sucks b/c i want to play around with this stand before i purchase it, but really don't have access to one.  :(

Title: Re: stand advice regarding a bogen 3322
Post by: bhtoque on January 14, 2005, 09:45:19 AM

I just looked at a pic of the 3322, but I could not tell if the bottom is fixed or adjustable.

Any special reason you are looking at that model?

JAson

Title: Re: stand advice regarding a bogen 3322
Post by: T.J. on January 14, 2005, 11:50:51 AM

not really, but after talking to you and a couple of people who already use a 3078, i think i'm leaning towards that model.

Title: Re: stand advice regarding a bogen 3322
Post by: Chris K on January 14, 2005, 12:01:05 PM

whichever model you get i would recommend getting this also:

(http://micsupply.com/newstandfitting.jpg)

you can get it from micsupply at this link:

http://micsupply.com/standaccessories.htm

do me a favor tenJ and grab one for me too! I'm good for it!

Title: Re: stand advice regarding a bogen 3322
Post by: T.J. on January 14, 2005, 03:34:52 PM

yeah i will when i order one. it is about time to give dave a call about these caps anyway

Title: Re: stand advice regarding a bogen 3322
Post by: goose on January 15, 2005, 02:48:12 AM

FYI - the bottom of the 3322 is definitely fixed.  I just looked at mine and it is metal, and mostly solid (small hole) underneath the center leg. 

Title: Re: stand advice regarding a bogen 3322
Post by: T.J. on January 15, 2005, 03:02:22 PM

so that means there is no way to adjust the footprint diameter. guess i'm definitely goin with the 3078, thanks goose

Title: Re: stand advice regarding a bogen 3322
Post by: T.J. on January 21, 2005, 03:21:26 PM

just got my stand in the mail the other day. i went with a 3078, which i couldn't be happier with. chris, i pick up a 3/8 to 5/8 fitting for you.

Title: Re: stand advice regarding a bogen 3322
Post by: learning_towalk on January 21, 2005, 03:41:25 PM

I have a 3078 too...it's GREAT!!!! tiny footprint or large footprint....short or tall....and built like a tank :)

instead of using an adapter on the stand, I'm just using my clamp right now...lol

Hopefully I'll get my JB3,cables,and mics in the mail soon (so I can use my rig) lol