Taperssection.com

Gear / Technical Help => Microphones & Setup => Topic started by: Nomad on February 18, 2005, 10:54:56 PM

Title: Shure vert bar
Post by: Nomad on February 18, 2005, 10:54:56 PM

I just got my vert bar in and I notice I need some converters to use them with my lux shock mounts. I was wondering what the size is and where is a good place to find them. Thanks again.

Title: Re: Shure vert bar
Post by: Brian on February 18, 2005, 10:59:12 PM

what size are the lux mounts?  the threads on the vert bar are standard 5/8" i believe

Title: Re: Shure vert bar
Post by: Mojowill on February 19, 2005, 03:18:59 AM

Check to see if the lux mounts have a 3/8" insert in them(brass)  if so you can unscrew that and then mount them on to the shure bar.

Title: Re: Shure vert bar
Post by: ChrisV on February 19, 2005, 03:20:25 AM

Yep, just take out the adapter pieces inside the 'Lux mounts and you got 5/8 threads that will fit perfectly on the vert bar.

Title: Re: Shure vert bar
Post by: Nomad on February 19, 2005, 11:27:45 AM

awesome thanks everyone! +T to all!

Title: Re: Shure vert bar
Post by: bhtoque on February 19, 2005, 11:34:03 AM

Just be careful, the 5/8 threads on the lux mounts are plastic and you can ruin them if you cross thread it.

JAson