Print Page - ADK TL's - XY and MS Bar?

Title: ADK TL's - XY and MS Bar?
Post by: F0CKER on February 19, 2005, 10:27:53 PM

What bars are ADK TL owners using to do XY & MS? Will the Shure A27 work or are the mics too tall?

Title: Re: ADK TL's - XY and MS Bar?
Post by: caymanreview on February 20, 2005, 05:06:31 AM

might depend on what shocks you have, the stock or the beefy ones

shure a27 worked for most anything i did

Title: Re: ADK TL's - XY and MS Bar?
Post by: alienbobz on February 20, 2005, 05:06:46 PM

I haven't done the MS yet, but for Vert XY I use a combination of the AKG KM235 bar (for the one hanging upside down) and the Windtech Multi-Position "C" Type Clamp to hold the other one. Works pretty well. The Windtech clamp can be found on bhphotovideo by searching for WIMPC10. Hope that helps.

Title: Re: ADK TL's - XY and MS Bar?
Post by: creekfreak on February 20, 2005, 11:37:23 PM

Many ways to do XY...I prefer vertical with my shure bar and a clamp

Title: Re: ADK TL's - XY and MS Bar?
Post by: bagtagsell on February 22, 2005, 12:33:46 AM

bcostigan vert bar mod

Title: Re: ADK TL's - XY and MS Bar?
Post by: fozzy on February 22, 2005, 01:02:32 AM

Quote from: bagtagsell on February 22, 2005, 12:33:46 AM
bcostigan vert bar mod

Probably the only way to do MS unless you use a clamp.

X/Y can be had mounting them horizintally on many types of combinations.

Title: Re: ADK TL's - XY and MS Bar?
Post by: Tim on February 23, 2005, 04:34:07 PM

mount one mic on the top of the stand (where you would ordinarily mount a tbar) then clamp the other one below it

Title: Re: ADK TL's - XY and MS Bar?
Post by: keepongoin on February 23, 2005, 04:40:06 PM

(http://img.photobucket.com/albums/v105/keepongoin/DSCN1240.jpg)

the bcosington style vert bar mod in action.

also can be seen in my avitar.

Title: Re: ADK TL's - XY and MS Bar?
Post by: keepongoin on February 23, 2005, 04:54:21 PM

http://taperssection.com/index.php?topic=13407.0

found the original thread...

Taperssection.com

Gear / Technical Help => Ask The Tapers => Topic started by: F0CKER on February 19, 2005, 10:27:53 PM