Taperssection.com

Gear / Technical Help => Post-Processing, Computer / Streaming / Internet Devices & Related Activity => Topic started by: Kyle on February 23, 2005, 10:28:24 PM

Title: dvd-a in wavelab - almost there
Post by: Kyle on February 23, 2005, 10:28:24 PM

ssia - almost there
i followed the instructions, output my audio_ts andf video_ts files
when i try to burn - i keep getting two different errors
sometime it says that the disc (brand new) has info on it, or
it says that there is an illegal entry in cb8 - wtf ???

any ideas out there?

Title: Re: dvd-a in wavelab - almost there
Post by: sygdwm on February 23, 2005, 10:42:06 PM

are you burning w/ wavelab or some other program. i use nero6 to burn the dvd, just wavelab to author. just curious.

Title: Re: dvd-a in wavelab - almost there
Post by: Kyle on February 23, 2005, 10:51:51 PM

Quote from: dre on February 23, 2005, 10:42:06 PM

are you burning w/ wavelab or some other program. i use nero6 to burn the dvd, just wavelab to author. just curious.

i tried both - no luck w/either
 hmmmm..... i must be doing something wrong - thanks for the reply ;)

Title: Re: dvd-a in wavelab - almost there
Post by: sygdwm on February 23, 2005, 11:15:42 PM

i have no frickin clue whats happening. i will be happy to walk you through the process. i have somehow successfully burned 100's of dvd-a's w/ wl5 (w/ no gaps too-btw did you read the thread that nickgregory posted?). its the least i could to do for all this board has taught me.

Title: Re: dvd-a in wavelab - almost there
Post by: Kyle on February 23, 2005, 11:22:37 PM

Quote from: dre on February 23, 2005, 11:15:42 PM

i have no frickin clue whats happening. i will be happy to walk you through the process. i have somehow successfully burned 100's of dvd-a's w/ wl5 (w/ no gaps too-btw did you read the thread that nickgregory posted?). its the least i could to do for all this board has taught me.

yea its weird. i followed the thread precisely - it just wouldn't burn
but now i'm out of dvds so i am goin to best buy tomorrow to try again!

thanks agiin for your help. i may shoot you a pm tomorrow if i'm still stuck, if that's ok  ;)

Title: Re: dvd-a in wavelab - almost there
Post by: sygdwm on February 23, 2005, 11:24:01 PM

no problem. happy to give back.

Title: Re: dvd-a in wavelab - almost there
Post by: F.O.Bean on February 24, 2005, 04:13:39 AM

wish i could help kyle, but ive never burned a dvd-a in wavelab, may have to give it a try just for shits and giggles tho :)

so the 48k stuff i have mainly from phish, should i burn as a 48k FLAC or burn as a 48k WAV and take advantage of the dvd media ???

personally i dont think its really worth it to burn 48k WAVS, i cant tell too much of a diff at all, can yinz ???

i just burn 48k FLACS and archive to dvd media :)

what do ya'll do ??? both ???

Title: Re: dvd-a in wavelab - almost there
Post by: sygdwm on February 24, 2005, 10:44:41 AM

you could author probably 2-3 shows at 16/48 on a dvd-a in wavelab. no advantage but less disks.

Title: Re: dvd-a in wavelab - almost there
Post by: baustin on March 19, 2005, 01:08:11 PM

these are the instructions i have. may have been written by somebody here. haven't actually tried myself, either:



BURNING DVD A



Go to File>New>Audio Montage>choose your sample rate... ( you can change it later by choosing Edit>Audio Properties)

Go to Edit pane>Mode pulldown>Mode DVD Audio

"             ">Fade pulldown>UNselect Create Default Fades In New Clips (keeps WL from putting fades at beg/end of each track)

"             ">Options pulldown>go to Edit Default Pre-gap>set to 0 sec (Keeps WL from putting gaps between tracks)

"             ">Options pulldown>Select Global Auto Grouping (lets you move a track to the right/left and all tracks to the right of

it move in unison)

Go to File>Save Special(montage)>choose Save As Template (so you won't have to go through all this every time)

Right click anywhere in the lower timeline area and choose Insert File(s)...

When you have everything edited the way you want it, Go to CD pane>Highlight DVD instead of CD>Choose CD wizard (magic wand)>I

uncheck adjust pause between tracks>hit apply

Then Check it by hitting Check (eyeglasses button)

If it checks out, Save the montage and move to the next part...


Go to File>New>DVD Audio Project

Click green Plus sign (add audio montage)>Navigate to your saved Montage from above and add it

Click Wrench icon (settings)>get your settings how you want them, add still pictures if you want

Click Orange Square thing (Edit menus)>tweak out your menu, add pics whatever

CLick Eyeglass icon (Check all)

If it checks out, Hit red CD icon (Create), and choose folder to output to

When done, Use Wavelab or Nero or whatever to burn the DVD using the folders that it output.

Title: Re: dvd-a in wavelab - almost there
Post by: Scooter on March 20, 2005, 03:38:00 PM

That was me ;D.  If you check it w/ the eyegalsses thing, it should tell you if there's some errors...

Title: Re: dvd-a in wavelab - almost there
Post by: wboswell on March 21, 2005, 05:19:13 PM

though not perfect, I'm satisfied:
http://www.audio-dvd-creator.com/
Being able to play in any player without any problems is nice.

Title: Re: dvd-a in wavelab - almost there
Post by: nickgregory on March 21, 2005, 05:58:32 PM

Quote from: wboswell on March 21, 2005, 05:19:13 PM

though not perfect, I'm satisfied:
http://www.audio-dvd-creator.com/
Being able to play in any player without any problems is nice.

agreed...I use this with none of the problems in differnet player issues that wavelab was causing me