Taperssection.com

Gear / Technical Help => Recording Gear => Topic started by: T.J. on February 28, 2005, 02:23:08 PM

Title: M1 error
Post by: T.J. on February 28, 2005, 02:23:08 PM

i've got a quick question i can't find an answer to: Sometimes while using my M1 recording at 44.1, i'll hit record and the M1 will blink
"F-44 1" before it writes id. it only happens randomly, and when it flashes my recording always comes out fine. what does this mean?

Title: Re: M1 error
Post by: dnsacks on February 28, 2005, 02:26:08 PM

If you hold down the play button, the m1 (or d100 or d7 or d8) will show the sample rate the tape's being played/recorded at. Sounds like you're holding down the play button for a long enough time for the m1 to tell you the sample rate that's being recorded.

Title: Re: M1 error
Post by: T.J. on February 28, 2005, 02:34:48 PM

maybe...i will hit record and pause together, and then hit play to actually begin recording. i just want to make sure there is nothing wrong with the recorder, b/c i'll probably be putting it up for sale soon. i've had a very short lived DAT taping career...jb3 is the way to go  ;D