Taperssection.com

Gear / Technical Help => Battery Boxes, Preamps, Mixers, ADCs, and Processors => Topic started by: nic on March 04, 2005, 02:18:56 PM

Title: MiniMe question
Post by: nic on March 04, 2005, 02:18:56 PM

since I forgot to pick up a set of small hex screwdrivers last night too check the internal jumpers, quick question.

when the MiniMe is being used as strictly adc(outboard pre in font), you want the jumpers set to low gain, correct? if you're using the MiniMe as pre+adc, do you set the jumpers to high gain?

Title: Re: MiniMe question
Post by: Daryan on March 04, 2005, 02:34:47 PM

Only set to high gain if you like clipping ;)  Regardless of the situation, unless taping bugs or something, low gain is where you want to be.

Title: Re: MiniMe question
Post by: creekfreak on March 04, 2005, 03:35:32 PM

for our applications...low gain all the way

Title: Re: MiniMe question
Post by: bagtagsell on March 07, 2005, 06:42:05 PM

i had mine on high gain jumpers, and If I had the mme in the fully counter clockwise position I would be okay.  That being said low is the way to go